RWG/AP 1/7 GN 75-L-U
Pitch: 75 mm
Trolley with one compartment in robust, self-supporting and hygienic design, made of high-quality 1.0 × 1.0'' (25 × 25 mm) stainless steel. 7 pairs of welded U-shaped shelf rails at distances of 3.0" (75 mm), with push-through and tilt protections on both sides as per DIN EN 18867-2. Cover plate made of 0.04'' (1.0 mm) thick sheet steel, folded by 1.6'' (40 mm) on all sides, lined with sound insulation on the underside, suitable for use as worktop. 4 polyethylene disc bumpers serve as bumpers and protect trolley on all sides as well as building-side walls from being damaged. Trolley runs on 4 swivel casters of which 2 with total locks, ø 4.9'' (125 mm), with pin fastening.
The Hupfer gastronorm trolley RWG / AP 1 / 7 GN 75-L-U has the lowest empty weight in comparison to other products and therefore provides outstanding handling properties, while its rail spacing of 75 mm gives it a 50 % greater capacity (when GN containers without lids with a depth of 150 mm are placed in it).
|Maximum dimension:||530 × 325 mm|
|Capacity:||7 × GN 1/1|
|Modular dimension:||75 mm with 7 pairs of insert rails (U)|
|Rectangular tube frame:||25 × 25 mm|
|Bevelled worktop edges:||40 mm|
|Payload:||85 kg/187 lbs|
|Castors:||4 swivel castors, 2 with lock, ⌀ 125|
|Main construction:||open, one-part|
|Design:||Low, with worktop|
Spec sheetTypeProduct dataFile typepdf (ca. 1.5 MB)Creation Date11.08.2022
Tender specificationTypeProduct dataFile typeText for clipboardCreation Date11.08.2022
Care instructions for stainless steelTypeOperating and assembly instructionsFile typepdf (0.54 MB)Creation Date30 Nov 2020
0112465 DWG drawingTypeDWG drawingsFile typedwg (0.21 MB)Creation Date15 Oct 2019Protected download for dealers and consultants: Please log in and get in touch with our contact partners with regard to activation if necessary.
Gastronorm trolleyTypeBrochures and product informationFile typepdf (2.43 MB)Creation Date15 Oct 2019