Gastronorm trolley for 14 × GN

RWG/AP 2/14 GN 75-L-U
Gastronorm trolley in low version for storing GN 1/1 containers and associated partition elements.
Key facts
  • With worktop

  • Lengthwise insertion

  • Pitch: 75 mm

  • U-shaped rails

Prices visible after registration. Register now
Ready for shipping in 1–3 days for destination countries within EU, other countries on request. Intermediate sale reserved.
Trolley with two compartments in robust, self-supporting and hygienic design, made of... more

Product information

Trolley with two compartments in robust, self-supporting and hygienic design, made of high-quality 1.0 × 1.0'' (25 × 25 mm) stainless steel. 14 pairs of welded U-shaped shelf rails at distances of 3.0'' (75 mm), with push-through and tilt protections on both sides as per DIN EN 18867-2. Cover plate made of 0.04'' (1.0 mm) thick sheet steel, folded by 1.6'' (40 mm) on all sides, lined with sound insulation on the underside, suitable for use as worktop. 4 polyethylene disc bumpers serve as bumpers and protect trolley on all sides as well as building-side walls from being damaged. Trolley runs on 4 swivel casters of which 2 with total locks, ø 4.9'' (125 mm), with pin fastening.

The Hupfer gastronorm trolley RWG / AP 2 / 14 GN 75-L-U has the lowest empty weight in comparison to other products and therefore provides outstanding handling properties, while its rail spacing of 75 mm gives it a 50 % greater capacity (when GN containers without lids with a depth of 150 mm are placed in it).

Technical information

Maximum dimension: 530 × 325 mm
Capacity: 14 × GN 1/1
Modular dimension: 75 mm with 14 pairs of insert rails (U)
Insertion type: Lengthwise
Rectangular tube frame: 25 × 25 mm
Worktop: 1.0 mm
Bevelled worktop edges: 40 mm
Payload: 85 kg/187 lbs
Castors: 4 swivel castors, 2 with lock, ⌀ 125
Main construction: Open, two-part
Design: Low, with worktop
Weight: 21.66 kg
Width: 619 mm
Depth: 813 mm
Height: 856 mm